moreSTEEL PRODUCT
moreCONTACT US
Sales Department
Email:David@gangsteel.comSkype:gangsteel001
Tel:0086-13598879167
UNS S42035 Stainless plate|S42035 Stainless sheet|S42035 Coi
Come from：United Iron and Steel Limited Editor：United Iron and stee Access：
UNS S42035 Stainless plate|S42035 Stainless sheet|S42035 Coil
UNS standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general application UNS. United iron and steel limited export high quality UNS grade N08020, N08367, N08800 N08811, N08904, N08926, S31277, S20100, S20103, S20153, S20161, S20200, S20400, S20910, S21400, S21600, S21603, S21800, S24000, S30100, S30103, S30153, S30200, S30400, S30403, S30409, S30415, S30451, S30452, S30453, S30500, S30600, S30601, S30615, S30815, S30908, S30909, S30940, S30941, S31008, S31009, S31040, S31041, S31050, S31060, S31254, S31266, S31600, S31603, S31609, S31635, S31640, S31651, S31653, S31700, S31703, S31725, S31726, S31753, S32050, S32100, S32109, S32615, S32654, S33228, S33400, S34565, S34700, S34709, S34800, S34809, S35045, S35135, S35315, S38100, S38815, S31200, S31260, S31803, S32001, S32003, S32101, S32205, S32304, S32520, S32550, S32750, S32760, S32900, S32906, S32950, S32803, S40500, S40900, S40910, S40920, S40930, S40945, S40975, S40977, S41000, S41003, S41008, S41045, S41050, S41500, S42035, S42900,S43000,S43035,S43400,S43600,S43932,S43940,S44400,S44500,S44626,S44627,S44635, S44660, S44700, S44735, S44800, S46800.
United iron and steel produce and export UNS S42035 Stainless plate thickness to 400mm, heavy thickness plate, cutting to flat bar, cutting profiled from stainless plate. For our quotation, please send email to sales@unitedsteelplate.com
UNS S42035 stainless steel chemical composition requirements
Noted: UNS S42035
A . Maximum, unless range or minimum is indicated.
B Designation established in accordance with Practice E527 and SAE J1086.
C .Unless otherwise indicated, a Grade designation originally assigned by the American Iron and Steel Institute (AISI).
D .Carbon analysis shall be reported to nearest 0.01% except for the low-carbon types, which shall be reported to nearest 0.001%.
E .The terms Columbium (Cb) and Niobium (Nb) both relate to the same element.
F .When two minimums or two maximums are listed for a single type, as in the case of both value from a formula and an absolute value, the higher minimum or lower maximum shall apply.
G. Common name, not a trademark, widely used, not associated with any one producer.
H. Iron shall be determined arithmetically by difference of 100 minus the sum of the other specified elements. I (Al +Ti) 0.85–1.20.
J. Naming system developed and applied by ASTM.
K .Cr+3.3Mo+16Np 40 min.
L .S42035 (Type 409) has been replaced by S42035, S42035, and S42035. Unless otherwise specified in the ordering information, an order specifying S42035 or Type 409 shall be satisfied by any one of S42035, S42035, or S42035 at the option of the seller. Material meeting the requirements of S42035, S42035, or S42035, may at the option of the manufacturer be certified as S42035.
M .Plate version of CA-6NM.
N Product (check or verification analysis) tolerance over the maximum limit for C and N in XM-27 shall be 0.002%.
UNS S42035 Mechanical Properties
UNS S42035 Materials for high temperature Service
SUPPLEMENTARY REQUIREMENTS
S1. Charpy Impact Testing of Plate UNS S42035
S2. Materials for High-Temperature Service UNS S42035
EQUIVALENT STEEL GRADE UNS S42035 OF UNS
If any need in UNS S42035, please contact us by email sales@unitedsteelplate.com
UNS standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general application UNS. United iron and steel limited export high quality UNS grade N08020, N08367, N08800 N08811, N08904, N08926, S31277, S20100, S20103, S20153, S20161, S20200, S20400, S20910, S21400, S21600, S21603, S21800, S24000, S30100, S30103, S30153, S30200, S30400, S30403, S30409, S30415, S30451, S30452, S30453, S30500, S30600, S30601, S30615, S30815, S30908, S30909, S30940, S30941, S31008, S31009, S31040, S31041, S31050, S31060, S31254, S31266, S31600, S31603, S31609, S31635, S31640, S31651, S31653, S31700, S31703, S31725, S31726, S31753, S32050, S32100, S32109, S32615, S32654, S33228, S33400, S34565, S34700, S34709, S34800, S34809, S35045, S35135, S35315, S38100, S38815, S31200, S31260, S31803, S32001, S32003, S32101, S32205, S32304, S32520, S32550, S32750, S32760, S32900, S32906, S32950, S32803, S40500, S40900, S40910, S40920, S40930, S40945, S40975, S40977, S41000, S41003, S41008, S41045, S41050, S41500, S42035, S42900,S43000,S43035,S43400,S43600,S43932,S43940,S44400,S44500,S44626,S44627,S44635, S44660, S44700, S44735, S44800, S46800.
United iron and steel produce and export UNS S42035 Stainless plate thickness to 400mm, heavy thickness plate, cutting to flat bar, cutting profiled from stainless plate. For our quotation, please send email to sales@unitedsteelplate.com
UNS S42035 stainless steel chemical composition requirements
| UNS S42035 Chemical Composition | |||||||
| Grade | The Element Max (%) | ||||||
| C | Mn | P | S | Si | Cr | Ni | |
| UNS S42035 | 0.08 | 1.00 | 0.045 | 0.030 | 1.00 | 13.5-15.5 | 1.0-2.5 |
| Mo | N | Cu | Cb | Ti | |||
| 0.2-1.2 | |||||||
A . Maximum, unless range or minimum is indicated.
B Designation established in accordance with Practice E527 and SAE J1086.
C .Unless otherwise indicated, a Grade designation originally assigned by the American Iron and Steel Institute (AISI).
D .Carbon analysis shall be reported to nearest 0.01% except for the low-carbon types, which shall be reported to nearest 0.001%.
E .The terms Columbium (Cb) and Niobium (Nb) both relate to the same element.
F .When two minimums or two maximums are listed for a single type, as in the case of both value from a formula and an absolute value, the higher minimum or lower maximum shall apply.
G. Common name, not a trademark, widely used, not associated with any one producer.
H. Iron shall be determined arithmetically by difference of 100 minus the sum of the other specified elements. I (Al +Ti) 0.85–1.20.
J. Naming system developed and applied by ASTM.
K .Cr+3.3Mo+16Np 40 min.
L .S42035 (Type 409) has been replaced by S42035, S42035, and S42035. Unless otherwise specified in the ordering information, an order specifying S42035 or Type 409 shall be satisfied by any one of S42035, S42035, or S42035 at the option of the seller. Material meeting the requirements of S42035, S42035, or S42035, may at the option of the manufacturer be certified as S42035.
M .Plate version of CA-6NM.
N Product (check or verification analysis) tolerance over the maximum limit for C and N in XM-27 shall be 0.002%.
UNS S42035 Mechanical Properties
UNS S42035 Materials for high temperature Service
SUPPLEMENTARY REQUIREMENTS
S1. Charpy Impact Testing of Plate UNS S42035
S2. Materials for High-Temperature Service UNS S42035
EQUIVALENT STEEL GRADE UNS S42035 OF UNS
If any need in UNS S42035, please contact us by email sales@unitedsteelplate.com